• Stainless Colander Lid
  • Stainless Colander Lid
  • Stainless Colander Lid
  • Stainless Colander Lid
  • Stainless Colander Lid
  • Stainless Colander Lid

Stainless Colander Lid

Shape: Round
Customized: Non-Customized
Color: Grey
Cookware Parts Type: Lids
Material: Metal
Transport Package: Inner Packing: Lined with Paper,
Customization:
Gold Member Since 2013

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
CL002
Specification
Outer pakcing: 5 ply-corrugated cartons
Trademark
Meanco
Origin
Made in China
HS Code
7010200000
Production Capacity
1, 200, 000PCS/Month

Product Description


Stainless Colander Lid
Stainless Colander Lid




Product Specification and Features
  • Material of tempered glass lid: Float glass
  • Colors: Clear, blue, green, brown, etc.
  • Material of tempered glass lid: Float glass
  • Without S. S. Ring
  • Diameter: 293mm
  • Dome max. Height: Cm
  • Thickness: 4mm, (customized 3mm or 5mm are welcome. )
  • Heat resistance: 320 degree centigrade
  • Thermal shock: 150-160 degree centigrade
  • Package detail: Inner packing: Lined with Alikali paper, Outer pakcing: 5 ply-corrugated cartons

    Stainless Colander LidStainless Colander Lid
    Test for quality control: 
     
    1. FLATNESS CHECK
    Place the glass lid on a completely smooth table , and put a piece of 1mm thickness iron plate beside the ring the glass lid, then moving the iron gauge along with the circumference of the lid, the glass lid passes the test if the iron plate does not push in
     
    2. THTERMAL SHOCK
    Put the glass lid into oven temperature to 200°C, and constant temperature for 30 minutes, remove it immediately into 20°C water , glass no broken or crack
     
    3. IMPACT TEST
    Place a lid, domed size up, on a hard surface,
    Dropping a 225 grams steel ball from a height of 1.5meter,
    No fracture no shatter, to pass
    Note : Don't drop the ball near or onto a vent hole /rivet hole  
     
    4. SCRATCH TEST (PRESSURE TEST)
    Use 120-grit (abrasive paper ) sandpaper to scratch two side and three directions 15 times, then put into room temperature water for 15 minutes, it pass if no breakage and no crack.
     
    5. POLOLARISCOPE CHECK
    To test the balance of compressive stress and tensile stress depends on the color what you see.
     
    6. FRAGMENTATION CHECK
    Apply tape (adhesive film)on the convex (front) surface of the lid, domed side upward, break it with a hammer broken 5X5cm measuring range , number of particles (fragments) counted should be at least 40,
    The purpose of this test is to determine whether the glass has been adequately toughened.
 

Send your message to this supplier

*From:
*To:
avatar Ms. Miyuki
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now